USB 2.0 Host port:
To connect USB printer (future firmware release)
RJ45, 10/100Base-T port:
To connect to an Ethernet network. Applications include;
Transfer measurement results and test profiles between the instrument and a computer using ReVeal BX software
Upload/download channel tables between the instrument and a computer using ReVeal BX software
Upgrade the instrument software using ReVeal BX software
Remote control of the instrument using ReVeal BX software (optional)
4.5 LEDs
The BX100A series are equipped with four LEDs providing the following functions;
The
Power LED
indicates the power state of the unit. The LED is off when the unit is powered off. The LED is green
when the unit is powered on. The LED is orange when the unit is connected to the AC Main and powered off.
The
ALM/ERR LED
is linked to the alarms and errors. The LED is solid red when there is an alarm or error condition. The
LED is flashing red to indicate an error or alarm that has occurred but is no longer present. This is called the history
function. In order to reset the history condition on any LED press the function key on the rubber keyboard (O -> O).
The
FRAME LED
indicates synchronization aspects of the DSL signal. The LED is green when showtime or link-up is
achieved. The LED is red while the unit is training or the expected DSL signal can not be detected.
The
SIGNAL LED
is related to the physical status of the built-in DSL Modem. A solid green LED indicates the modem has
synchronized with the DSLAM and showtime is achieved.
The BX100V is equipped with three LEDs providing the following functions;
The
Power LED
indicates the power state of the unit. The LED is off when the unit is powered off. The LED is green
when the unit is powered on. The LED is orange when the unit is connected to the AC Main and powered off.
The
SIGNAL LED
is related to the physical status of the built-in DSL Modem. A solid green LED indicates the modem has
synchronized with the DSLAM and showtime is achieved.
The
ALM/ERR LED
is linked to the alarms and errors. The LED is solid red when there is an alarm or error condition. The
LED is flashing red to indicate an error or alarm that has occurred but is no longer present. This is called the history
function. In order to reset the history condition on any LED press the function key on the rubber keyboard (O -> O).
BX100A/V e-Manual D07-00-001 Rev E01
Page 9 of 52
