VeEX UX400, User Manual

Page: 63 / 209

RFC 2544 Header Setups
The MAC, VLAN, MPLS, and IP configuration procedures are the same as in BERT mode.
Please refer to the BERT Application section for details.
Go back to top Go back to TOC
6.3.1.2 Frames Settings
The following can be configured under the Frames tab of the RFC2544 Setup:
Preset Frames:
Select from a list of recommended test frame sizes defined in RFC 2544:
Test frames are 64, 128, 256, 512, 1024, 1280, and 1518 bytes.
The default selected frame is 1518 bytes.
To select/deselect any of the recommended test frames, check the box to the right of the desired frame.
Add frame:
Two additional user configurable test frames of any size ranging from 64 bytes to 9000 bytes can be added.
To add additional test frames, tap the
Add Frame
button.
Enter the frame size using the numeric keypad and click apply.
Press the back button to return to the frames screen.
The new custom frame size is displayed (it can be enabled or disabled as needed).
RFC2544 Frames Setup
UX400 10G e-Manual D07-00-058P RevA00 Page 63 of 209