Results > Errors/Alarms Page 4
Page 4 of 4 lists the Bit Error performance (BERT) associated with the signal under test.
Dual DS1 Mode
8.1.3 Results > Event Log
The Event log tab brings up the screen listing the Error and Alarm events recorded during a test. The events are presented in
chronological sequence;
- Number (#): Event number, events are numbered sequentially
- Type: Indicates alarm or error type
- Start: Indicates when the alarm or error was detected
- Dur/Count: Indicates for how long the alarm or error was detected and provides duration (alarms) and ratio/count (errors). The
duration format is day:hour:minute:second
- Pages: Scroll through the pages depending on the number of events recorded.
TX150 e-Manual D07-00-023 Rev A02
Page 35 of 107
