VeEX RXT3900, User Manual

Page: 334 / 383

Alarm and Error Injection
The alarm/error section features a range of different anomalies that can be generated into the transmit signal.
Alarms and errors can be inserted any time during testing by tapping on the red
Alarm
and
Error Inj.
buttons on the right side of
the screen. Tap on the
Alarm/Err
button to configure alarm and error settings and assign an alarm and error to each button.
Alarm Injection:
CPRI LOS = Loss of Signal
CPRI LOF = Loss of Framing
Alarm Flow:
Continuous: Generates a continuous alarm when the button is tapped
Count: Specific count for 0.1s, 1s, 10s, 100s when button is tapped
Error Injection:
Error Mode:
Pattern:
BIT - Bit error injection in test pattern
CPRI:
Code: Code violation error injection
Error Flow:
Single
Count:
Enter the value
Rate:
1E-3, 5E-4, 2E-4, 1E-4, 5E-5, 2E-5, 1E-5, 5E-6, 2E-6, 1E-6, 5E-7, 2E-7, 1E-7, 5E-8, 2E-8, 1E-8, 5E-
9, 2E-9, 1E-9
Press Start to start the test.
Go back to top Go back to TOC
15.3.3 Results
Summary
Results Summary
RXT-3900 e-Manual D07-00-111P Rev A00