VeEX RXT3900, User Manual

Page: 236 / 383

Copying Services
Tap on the green
Copy
button on the bottom of the
Header
or
Service Attributes
tabs to copy
frame parameters specific to that tab to other services. For example, pressing Copy on the Header
tab will only transfer header parameters to other services.
MX Discover and Control Settings
For instructions on how to loop up/down the test set with another test set or device, please refer to MX Discover and Control .
The
Control
button offers additional loopback control settings including User Defined and OAM Discover. These features are
described in
MX Discover and Control
.
Peer-to-Peer Setup
Peer-to-Peer and asymmetric testing via the
P2P Setup
button is also available. Refer to Peer-to-Peer and Asymmetric Testing
section for more information. X-loop is for looping non-VeEX networking equipment.
Packet Capture
To capture packets, tap on
P1 Cap Start
. Stopping packet capture automatically names and saves results in pcap format. A
message displays the name of the saved file located in
Files
>
Saved
section of the test set. The file and can be exported to a
PC and analyzed using Wireshark. Refer to
Files
>
Viewing Saved Files and Results
section in
RXT-1200 platform
manual
for more information on retrieving and managing saved files.
Go back to top Go back to TOC
13.5.2 Results
Results - Config. Tests - Service 1
RXT-3900 e-Manual D07-00-111P Rev A00