Enabling/Disabling Tests
A check next to the parameters in the Service Attributes table indicates that the test for the
corresponding service is set to run. Tap on the box to remove the check and cancel the test for that
service.
Service Acceptance Parameters
The user establishes Pass/Fail test criteria for the following Service Acceptance Criteria. Values define the minimum requirements
to ensure that the service meets the Service Level Agreement (SLA):
FLR:
Maximum ratio of lost frames to the total transmitted frames allowed to still be compliant with the SLA. FLR is only
guaranteed for traffic conforming to the CIR. Enter a percentage from 0-100.
FTD:
Maximum transfer time that the frames can take to travel from source to destination, and still be compliant with the
SLA. FTD is only guaranteed for traffic conforming to the CIR. Values are measured in us, ms, or sec. Input a value within
the digital range of .001-999 and 1 us-999sec. The user can also choose to
Disable
the FTD threshold evaluation. FTD
will be measured anyway but the value will not contribute toward passing or failing the service.
IFDV:
Maximum frame jitter allowed to still be compliant with the SLA. FDV is only guaranteed for traffic conforming to the
CIR. Values are measured in us, ms, or sec. Input a value within the digital range of .001-999 and 1 us-999sec. The user
can also choose to
Disable
the IFDV threshold evaluation. IFDV will be measured anyway but the value will not contribute
toward passing or failing the service.
AVAIL:
Minimum percentage of service availability allowed to still be compliant with the SLA. The service becomes
unavailable if more than 50% of the frames are errored or missing in a one second interval. Availability is only guaranteed
for traffic conforming to the CIR. Enter a percentage from 0-100. The user can also choose to
Disable
the AVAIL
threshold evaluation. AVAIL will be measured anyway but the value will not contribute toward passing or failing the
service.
Copying Services
RXT-3900 e-Manual D07-00-111P Rev A00
Summary of Contents for RXT3900
