VeEX RXT3900, User Manual

Page: 223 / 383

Setup
For
Header
,
Frames
,
Thresholds
,
Throughput
,
Latency
,
Frame Loss
, and
Burst
, please refer to Setup - Standard Mode .
Background - General
# of Back. Streams:
From 1 to 7 streams
RFC 2544 Test Stream (%):
This is the max rate set in frame loss
Background Stream # (%):
Allocated Bandwidth per Stream: The total bandwidth for all streams cannot exceed 100%
Total (%):
Sum of all stream rates in %
Setup - Background - General
Background - Traffic
Background Stream #:
Select a stream number to configure.
Traffic Flow:
Select from Constant, Ramp, Burst, or Single Burst traffic flow.
Frame Size (Type):
Fixed or Uniform. If uniform is chosen, the user will have to input a minimum and maximum frame
size.
Frame Size (bytes):
If a fixed frame size is chosen, this option is enabled. Enter the frame size when a Layer 2 or 3 is
selected. Frame sizes can be from 64bytes to 1518bytes, in addition to jumbo frames up to 10k bytes.
BW (Transmit Bandwidth):
Configure the transmit rate for the stream.
Note: The bandwidth allocation per stream is already configured in the General Settings tab, but can be modified in this
screen as well.
Setup - Background - Traffic
RXT-3900 e-Manual D07-00-111P Rev A00