VeEX RXT3900, User Manual

Page: 150 / 383

Manual mode is chosen as the default configuration for starting/stopping the test.
Configure a test to run for a fixed duration or a delayed start. Manual mode is chosen as the default configuration for
starting/stopping the test.
Mode
: Manual, Timed, and Auto selections are available.
Manual:
This is linked to the Start/Stop function on the drop-down menu.
Timed:
The test duration can be set by the user. The test duration can be set in seconds, minutes, hours or days. The test
is activated by the Start/Stop function on the drop-down menu.
Auto:
A predetermined start time can be set by the user. The test duration can be set in seconds, minutes, hours or days.
After programming the start time and duration, press the
Start
button and the test will be activated automatically when the
programmed start time is reached.
Interval Save/Results Auto Save and Auto Server Upload is available in all modes. Depending on the V300 unit and test module
installed, Interval Save will appear as Results Auto Save.
Interval Save or Results Auto Save:
Test results automatically save at a specified interval. To enable interval save,
select
ON
and enter the
Save Interval
(in minutes.
Auto Server Upload
: Automatically uploads results to the server. The unit needs to be connected and registered to an R-
Server or FTP-Server to use this function. Selecting a server type will display a message prompt with the option to
connect and register to the server.
Server Prompt
Go back to top Go back to TOC
12.2.3 General
General tab
RXT-3900 e-Manual D07-00-111P Rev A00