Traffic Type tab:
The following Traffic distribution statistics are displayed in Count (#) and Percentage (%):
Layer 2/3 Unicast frames:
Number of Unicast frames received without FCS errors.
Layer 2/3 Broadcast frames:
Number of Broadcast frames received without FCS errors. Broadcast frames have a MAC
address equal to FF-FF-FF-FF-FF-FF.
Layer 2/3 Multicast frames:
Number of Multicast frames received without FCS errors.
Frame Size tab:
The following Frame distribution statistics are displayed in Count (#) and Percentage (%):
< 64 bytes frames
64-127 byte frames
128-255 byte frames
256-511 byte frames
512-1023 byte frames
1024-1279 byte frames
1280-1518 byte frames
> 1518 byte frames - Jumbo frames
5.6.2.3 Per Stream Results
The
Per Stream
tab displays the same type of statistics as seen in Global Results, but for each stream. For descriptions of the
parameters in each tab, with the exception of
Rates
, please refer back to
.
Summary:
Framed rate, data rate, # of bytes, total # of frames associated with each stream.
Errors:
Errors associated with each stream.
Service Disruption Test
results for each stream.
Events:
Events associated with each stream.
Traffic:
Traffic statistics associated with each stream.
Delay:
Delay associated with each stream.
Round trip delay measurements are only available in the per-stream results screen. Round trip delay measurement
requires a traffic loop at the far-end.
Rates:
Rate information associated with each stream.
Throughput Results - Summary per Stream
RXT-6400_Module_Manual
Page 79 of 119
