VeEX RXT-6000e User Manual Download Page 88

Page: 88 / 387

Signal > Optical Information (Page 4)

Page 4 displays the Optical module Power Measurement Graph.

Signal - Optical (Page 4)

Go back to top

Go back to TOC

7.2.5 Histogram

The Histogram tab displays the screen showing a historical record of the Alarms and Errors recorded during the

measurement interval. A dedicated page is available for errors and alarms including BER.

Page 1 displays the

Alarms

associated with the

SONET Alarm

Histogram - SONET Alarms (Page 1)

The alarms and errors presented depend on the signal type and structure selected. A graphical timeline on the

horizontal axis indicates when the event occurred. The upper left and right arrows allow the user to scroll through the

measurement period while the + and – keys allow zooming in/out of the time axis.

RXT-6200_RXT6000e_Module_Manual

Page 88 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands