VeEX RXT-6000e, User Manual

Page: 365 / 387

Throughput Summary Gateway List - Level 4
Go back to top Go back to TOC
17.4.1.6 Starting/Stopping a Throughput (Multiple Streams) Test
Once all configurations have been made, tap the Start button on the right section of the screen to start the measurements.
If testing on the fiber ports, make sure the LASER is turned On before starting the test.
End-to-End Testing
Connect the test set to another unit that supports eCPRI testing.
After configuring test settings on both units, start the tests.
Go back to top Go back to TOC
17.4.2 Throughput Results
When the test is first started, the screen changes to the Global/Aggregate results screen automatically.
Go back to top Go back to TOC
17.4.2.1 Global/Aggregate Results
The Global results pages display measurements for all traffic streams as well as non test traffic.
The Global Stream Summary screen displays:
Stream number (#)
Transmit and Receiver rate (bps)
Events (errors/alarms) associated with the stream
Throughput Results - Global Stream Summary
RXT-6200_RXT6000e_Module_Manual Page 365 of 387