VeEX RXT-6000e User Manual Download Page 111

Page: 111 / 387

9.2 Overhead Analyzer & Generator

Tap the

Overhead Analyzer

icon to display the OH screens shown below.

Overhead Analyzer Menu

The Overhead is color coded for simplified viewing.

Decoding Bytes

Tapping the applicable byte enables an automatic decode – a byte description including the Hexadecimal and Binary

value is provided. For some bytes, an advanced decode of the various bits is also available.

Byte Analyzer - Advanced Decode

9.2.1 OTN Frame Analysis

The OTU framing is divided into two portions: FAS and MFAS.

Frame Alignment Signal (FAS)

RXT-6200_RXT6000e_Module_Manual

Page 111 of 387

Summary of Contents for RXT-6000e




































































































































































































































































































































































































Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands

VeEX RXT-6000e, User Manual

Search results

Summary of Contents for RXT-6000e

Reviews:

Related manuals for RXT-6000e

Brands by name

Popular brands