8.1.1 IP Setup
Enter a Static IP address or use DHCP to connect to the network.
DHCP mode - an IP address will be automatically assigned to the test set.
Static mode - user is required to enter a Local IP, Subnet, Gateway, and DNS IP (if the DNS server option is turned on).
The user can also turn the DNS server option On of Off.
A DNS IP address is required when using URL format as a destination address.
The user needs to establish an IP connection and address prior to Ping, Trace Route, Web/FTP, ARP Wiz, and VoIP
testing.
IP Setup - Network settings (Page #1)
IP Setup - Network settings (Page #2)
IP Setup - Port settings
MX100/120 e-Manual D07-00-004 Rev A04
Page 73 of 115
