MX100/120 Profile Selection
MX100/120 Profile View
6.5 Measurement Settings
Measurement Tab:
The measurement and event log settings are configured in this screen.
Mode:
Manual, timed, or auto mode are available.
Manual mode - User starts and stops the measurements manually.
Timed mode - User defines the duration of the test; after the test is started, the test will run for the configured
duration and stop automatically.
Auto mode - User configures the start and end time of the test, selects the type of test to run, and a profile if one has
been previously stored.
The test set must be powered on to carry out and automatic test.
MX100/120 Measurement settings - Auto Test
MX100/120 Measurement settings - Manual Timed
MX100/120 e-Manual D07-00-004 Rev A04
Page 21 of 115
