VeEX MTX150x Lite User Manual Download Page 23

Page: 23 / 148

Basic Operation

Exit

: Return to the previous screen.

Home

: Return to the Home Menu.

Active Test Application

: Access to test applications or test application menu which varies

depending on the test set mode. WiFi, SLM, FIBER, and OSA are some of the applications avail-
able.

Utilities Test Application

: Opens the System Tools and Utilities menu.

Shift Key

: Serve the same function of expanding the side menu bars as pushing the physical

side buttons on the sides of the unit. Tap to reveal/hide icons and test function keys.

AC Charging

: The unit is plugged into external AC power. Tap to see battery charge status.

Battery Powered

: The unit is powered by the battery. Tap to see battery charge status and

estimated autonomy time.

Fiberscope

: Indicates that a fiberscope is connected to the unit. Tap the icon to go to the Fiber-

scope application.

LEDs

Soft LEDS are supported on several test modes:

Single Port LED Status Lights

Summary of Contents for MTX150x Lite














































































































































Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands

VeEX MTX150x Lite, User Manual

Search results

Summary of Contents for MTX150x Lite

Reviews:

Related manuals for MTX150x Lite

Brands by name

Popular brands