ensure safe operation however please observe all safety markings and instructions. Do not operate the instrument in the presence
of flammable gases or fumes or any other combustible environment. VeEX Inc. assumes no liability for the customer's failure to
comply with safety precautions and requirements.
4.0 Basic Operation
The MPX100 has the following features:
Rack mounted Ethernet Probe
10/100/1000 Base-T
1000Base-X with SFP
Layer 1 to Layer 4 Traffic Generation and Analysis
Same specifications as the MX100
ReVeal MPX for outband control via 10/100T port for:
Live on-demand testing
Schedule tests (coming)
RS232C Supervisor serial port
4.0.1 Interfaces
The MPX100 is equipped with the following test port and LEDs located on the front of the unit:
10/100/1000Base-T RJ-45 Port
10Mbps
100Mbps
1000Mbps
1000Base-X SFP Port
1000Base-SX 850nm; 1Gbps
1000Base-LX 1310nm; 1Gbps
1000Base-EX 1550nm; 1Gbps
Power LED
- indicates power status - LED is off when the unit is powered off and green when the unit is powered on.
Link LED
- indicates physical link status - LED is off when there is no link and green when the link is up.
Activity LED
- indicates traffic status - LED is off when no traffic is present and green when traffic is received.
MPX100 - Front View
MPX100 e-Manual D07-00-022 Rev A00
Page 5 of 46
