VeEX MPA, User Manual

Page: 741 / 842

Protocol Tabs
741
dialog box disappears and your selection appears in the top row of Rearrange
Columns dialog box display window.
4. Again, in the Rearrange Columns dialog box, select the Columns button to
redisplay the Select Next Column dialog box.
5. In the Select Next Column dialog box, select another button for the associated
description to appear in order immediately following the previous row entry. The
Select Next Column dialog box again disappears.
6. Repeat Steps 4 and 5 to select the chosen order for all remaining entries in the
Select Next Column dialog box.
7. There are two choices for submitting the selected column display order: (1)
Selecting the Apply button retains the column display order settings until the
next time the unit's power is cycled; (2) Selecting the Save button retains the
column display order settings indefinitely.
The Columns settings entered via a remote connection are completely
independent of each other. The remote settings are saved on the remotely each
connected PC. The
Clear button can be used to clear the entries in the Rearrange
Columns dialog box display window, should you want to rearrange the existing
order in the display window. The Cancel button can be used to cancel out of the
operation without changing the existing column display order. Clicking on the Apply
button when no items are listed in the display window will set up the default
columns display order.
Inserting GFP Errors and Alarms
(Specifically for GFP Mappings)
To determine if receiving equipment can detect an error on an incoming signal, you can
configure the system to insert specific errors and alarms into an Ethernet stream.
To insert multiple errors:
1. Follow the Configuring GFP Packet Streams instructions to configuring the GFP
payload/mapping, and enabling GFP packet stream(s).
2. Select Error / Alarm from the tabs along the left side of the Config Screen.
3. Select Error Type and choose an error type from the Select Error Type dialog
box.
MPA_e_manual_D07-00-129P_RevA00