![VeEX MPA User Manual Download Page 677](http://html2.mh-extra.com/html/veex/mpa/mpa_user-manual_3826057677.webp)
Protocol Tabs
677
6. Configure the desired
Data
Rate
,
Frame Length
, and
Payload
test pattern.
7. Select the
Save All
button to save the entered test stream parameters, then
select the
Exit
button.
8. The Status menu field will display the following
•
The Fabric Login status will display “Fabric: Not Logged in”
•
The Name Server Login status will display “Named Server: Not Logged in”
9. Select the On/Off button labelled
1
to the left of the stream to turn on stream
traffic generation.
10. Fibre Channel verification statistics may now be observed.
Fabric and Name Server login procedure
(Specifically for Fibre Channel SAN testing on the Packet tab)
MPA_e_manual_D07-00-129P_RevA00
Summary of Contents for MPA
