VeEX MPA, User Manual

Page: 415 / 842

Protocol Tabs
415
K1 Bits 1-4 (Linear Mode)
This function edits the first four bits of the K1 byte. The options for this function are
predefined and use mnemonics to identify bit patterns.
The following options are available:
Options Description
(0000) NR No Request, Bit pattern 0000
(0001) Non Rev Do not revert, Bit pattern 0001
(0010) RR Reverse Request (Ring), Bit pattern 0010
(0011) Unused Not Used, Bit pattern 0011
(0100) EXER Exerciser (Ring), Bit pattern 0100
(0101) Unused Not used, Bit pattern (0101)
(0110) WTR Wait to restore, Bit pattern (0110)
(0111) Unused Not used, Bit pattern (0111)
(1000) MS Manual switch, Bit Pattern 1000
(1001) Unused Not used, Bit pattern (1001)
(1010) SD-LP Signal degrade low priority, Bit pattern (1010)
(1011) SD-HP Signal degrade high priority, Bit pattern (1011)
(1100) SF-LP Signal fail low priority, Bit pattern (1100)
(1101) SF-HP Signal fail high priority, Bit pattern (1101)
(1110) FS Forced switch, Bit pattern (1110)
(1111) LP Lockout of protection, Bit pattern (1111). This is
also the Transmit Illegal button setting.
MPA_e_manual_D07-00-129P_RevA00