VeEX MPA, User Manual

Page: 414 / 842

SDH Tab
414
•
K1 Bits 5-8 (Ring Mode)
•
K2 Full Byte (Ring Mode)
•
K2 Bits 1-4 (Ring Mode)
•
K2 Bit 5 (Provisioned) (Ring Mode)
•
K2 Bits 6-8 (Ring Mode)
Duration in Frames
The Duration in Frames function determines the number of frames transmitted that
contain specific K1 and K2 bytes. These bytes are configured using the functionality
located on the transmit APS screen.
Frame count is entered using a keypad. Values ranging from 1 to 65535 frames can be
entered.
K1 Full Byte (Linear Mode)
This function configures the bit pattern of the K1 byte using either predefined or user
defined settings by individually setting the eight bits of the K1 byte using the touch
screen keypad.
The following options are available:
Options Description
Set to 00000000 Configures the K1 byte to 00000000 bit pattern.
Default
(10101010) Configures the K1 byte to 10101010 bit pattern.
Illegal
(11111111) Configures the K1 byte to 11111111 bit pattern.
User Defined Allows you to configure the bit pattern one bit
at a time using the touch screen keypad.
MPA_e_manual_D07-00-129P_RevA00