6.0 Common Functions
The following common functions are described in the
6.1 Help
Help provides a text based online help related to the operation of the test set and the measurements performed. The user can
directly access from the table of contents hyperlinks or by doing a search on keywords.
6.2 Settings
This section provides settings for the global parameters of the test set.
About:
Provides information about the software version, hardware serial number, MAC addresses, and installed options. This
section also allows the user to add software options by programming the new option with the key provided by VeEX Inc Customer
Care Department.
Bluetooth:
Provide the utilities to configure, enable, and associate devices with the test set via Bluetooth wireless interface. The
Bluetooth option needs to be purchased to enable this menu.
Backlight:
Provides backlight control of the unit. The user can select the brightness for battery and AC operations. The user can
also select a timer to turn off the backlight if the device is not used. This function helps improve the battery life. There are two
settings, one for battery power and one for AC power. To enable the timer, check the item "Turn off backlight if device is not used
for" and with the pull down menu adjust the duration of the idle time before the backlight is turned off. Once the timer is active, and
the backlight turned off, any action on the test set (touch-screen, keyboard) will turn on the backlight again.
Please refer to the backlight section, go to Backlight section.
Screen:
Go to this section to change the screen theme, blue or green. Also provides the utility to calibrate the touch-screen when
out of calibration.
Power:
Provides information about current powering source, and information about the battery gauge.
Global Settings:
This section allows the user to select an alternative language for the user interface (only English is supported
at this time) and also to set the unit system (English - feet or Metric - meter). It also provides selection for File Name Prefix. Once
entered the prefix will be added to any file exported out of the test set.
Selftest:
This utility provides a complete diagnostic of the test set. The report can be exported and provided to VeEX Inc
Customer Care Department.
Date and Time:
Set the date and time accordingly to the customer time zone. Daylight savings are automatically enabled in the
utility.
Network:
Set the parameters for the 10/100T port available on the chassis. The port, once set is automatic and always tries to
connect with the settings once connected to a proper network. These settings are active when the port is not used for testing. The
applications that will use these settings are remote control, and connection to ReVeal, VeEX PC software application.
6.3 Files
The test instrument saves the Files (Test results) in the unit's internal memory for recall and viewing. To access the saved results,
click Files on the main menu. There are three application tabs;
Capacity
The capacity screen displays the current file capacity and current % memory utilization.
Explorer
The Explorer screen allows you to View, Delete, or Rename files. File protection is provided using the Lock/Unlock button.
File Capacity
File Explorer
LX100 e-Manual D07-00-019 Rev A01
Page 35 of 44
