Throughput Results - Global Stream Summary
The
Aggregate
screen displays these parameters:
Line Rate
(bps)
:
This value is always fixed since it depends on the maximum capacity of the link under test, hence the test
interface that is configured.
Utilization:
% of Line Rate. For example, if we transmit 100Mbps on a 1Gbps interface then the utilization value is 10% (or
100Mbps) of the total link capacity (or Line Rate).
Utilization (bps)
Framed Rate:
(P MAC/IP VLAN Tag + Type/ CRC) / (P Total Overhead) * Line Rate %
(in Mbps).
Data Rate:
Payload / (P Total Overhead) * Line Rate %.
Total # of frames, bad frames, and pause frames
.
Throughput Results - Global Aggregate
eCPRI Testing User Manual D07-00-131P RevA00
Page 34 of 53
Summary of Contents for eCPRI
Page 1: ......
