6.3.3 Measurement Settings
10G Measurement Setup
The measurement and event log settings are configured in this screen.
Profile:
Last configuration, Delete, Save, Save as..., Default.
Mode:
Manual, timed, or auto mode are available.
Manual mode:
Starts and stops the measurements manually.
Timed mode:
Defines the duration of the test; after the test is started, the test will run for the configured duration and
stop automatically.
TX Start:
Separated or Coupled. Configure how the measurements are started by separating or coupling the transmitter and
receiver.
Separated:
Independent control (Start/Stop) of the transmitter is enabled. At the start of the test only the receiver is
turned on; the transmitter must be turned on manually.
Coupled:
Transmitter and receiver are turned on at the same time, and the measurements start at the same time at
the start of the test.
Results Auto Save
: ON/OFF. When ON is selected, results are saved automatically.
Maximum Number of Saved Events:
128, 256, 512, 1024. Maximum number of error and alarm events recorded during a
test.
eCPRI Testing User Manual D07-00-131P RevA00
Page 17 of 53
Summary of Contents for eCPRI
Page 1: ......
