The CX100 is equipped with three LEDs while the CX120, CX150 and CX180 models are equipped with four LEDs.
The Power LED indicates the power state of the unit. The LED is off when the unit is powered off. The LED is green when the unit
is powered on. The LED is orange when the unit is connected to the AC Main and powered off.
The ALM/ERR LED is linked to the alarms and errors. The LED is solid red when there is an alarm or error condition. The LED is
flashing red to indicate an error or alarm that has occurred but is no longer present. This is called the history function. In order to
reset the history condition on any LED press the function key on the rubber keyboard (O -> O).
The DIG LOCK LED indicates the proper digital signal lock The LED is green when locking is achieved. The LED is red when
expected digital signal can not be found.
The AUX LED is related to the physical status of the built-in DOCSIS Cable Modem or Upstream Generator functions. This LED is
available on the CX120/150/CX180E models only. The LED is off when the Cable Modem or USG are inactive. Fast flashing green
indicates the Cable Modem is ready. Slow flashing indicates the Cable Modem has achieved the initial down stream and up stream
locking. Solid green indicates the Cable Modem is activated and online.
5.0 Home Menu
This menu can be reached at anytime during operation by pressing the home key, accessible on the rubber keyboard.
The upper part of the menu contains items specific to the test application of the handheld test set, while the lower part of the menu
contains items common to all VeEX VePAL handheld test sets. The Installation Check function is however specific to CX models
only.
Some items are optional, and require the purchase of a software option in order to be activated. Some items have not been
released, and will become available in future software releases.
6.0 Channel Tables and Locations
The unit requires Channel Tables and setting up its locations to perform measurements.
By default, the unit comes with several pre-loaded tables. These tables can be edited and modified under Settings (Home ->
Settings icon -> Setup tab).
CX100/110/120/150/180 series e-Manual D07-00-002 Rev B01
Page 9 of 39
