32
Console Diagnostics Using The TELTECH Diagnostic Tool
Remote users may connect a laptop to the TLS4 via the network the TLS is on or via crossover connection. An
SSH connection can be established from a laptop using a terminal program such as Putty, or the command line in
some operating systems. The method below describes a crossover Ethernet network SSH connection.
1. Establish a crossover network connection to an available Ethernet port on the bottom of the TLS4 (see
2. Open a Command Prompt window.
3. Using the console’s IP address (e.g., 169.254.21.12) and 22 (port number) type the following ssh format:
ssh [email protected] 22
4. Press
Enter
.
5. When the login screen appears, login as
tlstech
6. Enter the password:
tlstech
7. When the TLSTECH menu appears, enter the number of a desired choice then press
Enter
to view that result.
To exit the program, press
0
then press
Enter
.
