System Setup Screens
[280-283] TCPIP Setup
28
[280-283] TCPIP Setup
Legend for numbered boxes
TCP/IP
6
1
2
3
4
7
6
5
[280]
[281]
[282]
[283]
[280]
[281]
[282]
[283]
Only for 15 minutes after powerup, or after the GET button
(item 6) is touched, will the TLS2P display the actual TCPIP
parameters (280 - 283) saved in the Lantronix server (see
upper screen). Thereafter, the TLS2P substitutes xxx in place
of the actual 280-283 parameter data, indicating the
screen’s data is no longer valid (see screen in dotted box).
This substitution frees the TLS2P from having to be in
continual commuication with the Lantronix server.
1
Current Host IP [280] Address in Lantronix server.
2
Current Subnet Mask Address [281] in Lantronix server.
3
Current Gateway IP Address [282] in Lantronix server.
4
Current Host Port [283] in Lantronix server.
5
IP ADDR button - touch to enter the the associated
TCPIP parameter.
6
Get button - touch this button to have the TLS2P update
the display with the actual TCPIP parameters saved in the
Lantronix server.
7
Set button - Touch to save entered TCPIP parameters in
the Lantronix server.
NOTE: If any parameters have been changed but the SET
button was not touched to save them, the TLS2P will
automatically save them after 5 minutes.