Troubleshooting
Probe Troubleshooting
60
Figure 23. Diagnostic Menu - Explanation
consoles\tls50\50dgex.eps
T1: PROBE TYPE:
GLB01
T1: SERIAL NUMBER
XXXXX
SOFTWARE VERSION
XXXXXX-XXX Y
T1: PROBE ID
0XD011
T1: PROBE LENGTH
XXX
T1: GRADIENT
XXX.XXXX
T1: NUMBER SAMPLES
20
T1: SAMPLES READ
XXXXXX
T1: SAMPLES USED
XXXXXX
T1: COUNTS
00 XXXXX 01 XXXXX
T1: COUNTS
16 XXXXX 17 XXXXX
T1: COUNTS
18 XXXXX
DIAGNOSTICS
PRESS <ENTER>
Console's current software version: XXXXXX-XXX
Options: Y= 1 Alarm package, Y= 2 Serial and Alarm Package).
Probe's manufacturing code.
Probe's serial number.
Probe calibration factor used to calculate water height and product height.
Number of probe measurement sets made before posting water height,
product volume, and product temperature. (A measurement set consists of
probe counts 00 - 18 discussed below.)
Historical total of probe measurements read.
Historical total of probe measurements used.
Probe counts used to calculate water height, product volume, and
product temperature. Counts 00 - 18 constitute one probe measurement
set.
