TLS-450 Setup and Operation Screens Manual
146
Device
The Auto detection mechanism may restrict the DIM Device Type choices available to choose from in
case a Device is already available in the slot. If the DIM Device is auto-detected, this field will be
enabled but grayed out.
If there is no Device in the slot, then all supported options for that specific slot will be
available. Setting the Device to "None" will also set all the common fields and button icons along the
bottom of screen to their default values thereby marking the entry as removed from the configured list
of DIM Devices (a Save is always needed for the changes to take effect. A message warning will be
shown to the user prior to the save).
Allowable selections: List, None
Default: None
Label
Enter a unique label for the DIM Device.
Allowable selections: Up to 20 alphanumeric characters
Default: Comm Device Identifier and number
CDIM Comm Devices – General (page 2)
