6-11
6
Communications Setup
Auto-Dial Setup
Press TANK/SENSOR to select a second receiver and repeat the steps described above to select the types of
reports to be transmitted to that receiver. Press TANK/SENSOR to select a third receiver, and so forth. When you
have selected reports to transmit to all the receivers that you want, press STEP in response to the RCVR
REPORT LIST message.
AUTO DIAL METHOD: ALL PHONES/SINGLE PHONE
When you press STEP in response to the RCVR REPORT LIST message, the system displays the message:
You can send the selected reports at the same time (frequency) for all phone numbers (receivers) or different times
for each phone number. To choose All Phones, press STEP. The system displays the ON DATE message for All
Receivers:
To transmit reports using different frequencies, press CHANGE in response to the AUTO DIAL METHOD
message and press ENTER. The system confirms your choice with the message:
Press STEP. The system displays the message:
NOTES: If you choose Single Phone, you must enter report transmission frequency information for each receiver
individually. The screen examples shown in this procedure assume that you have selected All Phones. If you
choose Single Phone, the phrase “ALL RCVR” is replaced on each screen by the selected receiver number (RCVR
1, RCVR 2, etc.).
AUTO-DIAL FREQUENCY: SPECIFIC DATE
When you press STEP in response to the AUTO DIAL METHOD message, the system displays the message:
Use this display to select the Auto-Dial Frequency. You may choose among the following frequency options:
•
ON DATE: Lets you enter a specific date and time to transmit the reports.
•
ANNUALLY: Lets you select the month, week (1, 2, 3, or 4), and day you wish to transmit reports.
•
MONTHLY: Lets you select the week (1, 2, 3, or 4) and day you wish to transmit reports.
•
WEEKLY: Lets you select the day you wish to transmit weekly reports.
•
DAILY: Lets you select the time of day you wish to transmit daily reports.
•
BIR END: Lets you select having reports transmit at the actual closing time of the period. For rolling, this would
be the end of the rolling period; for monthly this would be the first of the month.
AUTO DIAL METHOD
ALL PHONES
ALL RCVRS
ON DATE
SINGLE PHONE
PRESS <STEP> TO CONTINUE
SINGLE RCVR: D1
ON DATE
ALL RCVRS
ON DATE
