Appendix B: Typical Setup Parameters - TLS-300
Leak Test Method Setup
B-3
The product code for all partners should be the same, e.g., tank 1 product code 1 manifold partner tank 4 product
code 1.
Leak Test Method Setup
Low Product:
Mag Type 8473
Mag Type 8493
00000
0000
Vol at 250 mm
Vol at 125 mm
Leak Alarm Limit
374
10 litres
Sudden Loss Limit
374
200 litres
Tank Tilt
0
10 mm
Manifold Tanks
None
Default*
Leak Min. Annual
0
60%
Periodic Test Type
Standard
Default
Annual Test fail Al.
Disabled
Default
Periodic Test Fail Al.
Disabled
Default
Gross Test Fail
Disabled
Default
Ann. Test Averaging
OFF
Default
Per. Test Averaging
OFF
Default
Tank Test Notify
OFF
ON
Tank Test Siphon B
OFF
Default
Delivery Delay
1 Minute
15 Minutes
Table B-4.
Leak Test Method Setup
Parameter
Default
Set As
Test on Date
Current T & D All Tanks
Default
Start Time
Disabled
Default
Test Rate
0.76 LPH
0.38 LPH
Duration
2 Hours
4 Hours
Table B-3.
In-tank Setup
Parameter
Default
Set As
