22-3
22
3-Wire C.L. Sensor Setup
Setting Up Additional 3-Wire C.L. Sensors
•
ANNULAR SPACE •DISPENSER PAN
•
MONITOR WELL •STP SUMP
•
PIPING SUMP
When the correct category displays, press ENTER.
Setting Up Additional 3-Wire C.L. Sensors
If you have additional sensors to configure, press STEP, if necessary until you see the ENTER SENSOR
LOCATION message. Press TANK/SENSOR to select another sensor and follow the procedures described in the
preceding sections, beginning with “3-Wire C.L. Sensor Location” on page 22-2.
If you have entered setup information for all sensors, press FUNCTION to exit.
