Operation of the System
Typical Dispensing Examples
61
16 characters). Press ENTER when you have entered the desired label. Note, if you were to press ENTER
when CUSTOM FIELDS displays, the message CUSTOM FIELDS NOT ENTERED will scroll across the
Descriptor Field. To avoid seeing this message, you have to press NEXT after CUSTOM FIELDS is displayed.
For single or multiple deliveries, the first three Custom Fields will be used for operator entries at the start of a
delivery. The operator either enters a value for each enabled field, or by selecting the ENTER key, accepts the
default value for the field.
The last four fields will be used for operator entries at the end of a delivery, after the FINISH key is pressed. The
operator either enters a value for each enabled field, or by selecting the ENTER key, accepts the default value for
the field. The operator will press FINISH after the final custom field is entered and the delivery is closed as normal
and the transaction record is saved with enabled custom fields.
The operator is prompted only for custom fields that have been enabled. For example, if only Custom Field 1 and
Custom Field 5 are enabled, there will be one prompt for custom field 1 at the start of delivery and one prompt for
custom field 5 at the end of a delivery. There will be no prompt for entry of fields that are not enabled.
If no custom fields are enabled, or none of the last four custom fields are enabled, one press of the FINISH key will
close a delivery as normal.
DISPENSING WITH BATCH PRESET BY PRODUCT ENABLED
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must select a product first).
2. When a product is selected, (Batch Preset, Transfer Interlock is enabled along with Transfer switch), default
batch preset for that product is available in the Preset Field).
3. Press PRESET to go to the Preset screen. Press NEXT button to go to Change Preset screen, then press
ENTER to accept. (If the user wishes to change the default preset to a different number; from the Change
Preset screen they press NEXT and increment up or down for each digit, pressing NEXT to move from digit to
digit. They press ENTER to accept the new number. If the user wishes to disable the preset then press the
PRESET button, scroll to Disable and press ENTER. The Icon to the left of the preset field is solid when the
preset is enabled and flashes when disabled.)
4. Deliver Product until Preset level is reached and flow is shut down.
5. Press FINISH button to print Volume Ticket.
DISPENSING WITH GROSS PRESET ENABLED
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must select a product first).
2. When a product is selected and Temperature compensation is enabled for that product, (Gross Preset is
enabled in Delivery options), then Preset value shown is the Gross volume, delivered volume in the Register
Field is Net volume.
3. Deliver Product until Gross Preset level is reached and flow is shut down.
4. Press FINISH button to print Volume Ticket.
DISPENSING WITH GROSS VIEW ENABLED
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must select a product first).
2. When a product is selected and Temperature compensation is enabled for that product, (Gross View is
enabled in Delivery options), then dispensed volume in Register Field is the Gross volume.
3. Deliver Product until required Gross Volume level is reached.
4. Press FINISH button to print Volume Ticket.
