INSTALLATION and QUICK HELP
FOR TLS CONSOLE INTERFACE TO THE
VEEDER-ROOT EMR4 DATALINK
USING AN XTEND 900 MHZ WIRELESS MODEM
577014-353 Rev. A
Veeder - Root
Page 1 of 18
INTRODUCTION
This Installation and Quick Help Guide contains the necessary information to connect a wireless modem
to a TLS-300, TLS-350, TLS4, or TLS-450PLUS console and obtain the tank information in the DataLink
program on a PC.
DESCRIPTION:
Kit Number
Description
General Contents and Comments
0845900-037
TLS-3XX Consoles Interface Kit
- XTend 900 MHZ
This TLS kit includes:
•
Wireless modem with standard antenna
•
Special 9-pin connector for modem
•
Special 25-pin connector for console
•
25-foot Ribbon cable for console to modem
connection
•
Power supply for modem
•
This manual
0845900-040
TLS-4XX Consoles Interface Kit
- XTend 900 MHZ
This TLS kit includes:
•
Wireless modem with standard antenna
•
9-pin connectors for modem and console
•
25-foot ribbon cable for console to modem
connection
•
Power supply for modem
•
This manual
INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT
Each modem has a unique address assigned by Veeder-Root. This number is on the label on
the modem itself, and on the box. This number is your traceability from the TLS console to the
office software. The TLS connected modem number will be entered into the office software in
the TLS modem location on the DataLink configuration page.
TLS CONNECT KIT MODEM:
