EMR
3
Setup and Operation Manual
Typical Dispensing Examples
50
Typical Dispensing Examples
The following scenarios outline the steps the operator may take to dispense product. The two basic methods of
delivery are Volume and Currency. They are introduced into the default mode selected in setup for pre-dispense.
The operator selects the options appropriate for that mode and presses start to begin the actual dispensing. If
multiple products are setup they choose from the available products. If a multiple delivery is desired they hold the
START button for more than 1 second to place them in the Multiple Delivery State. Dispensing of fuel may begin.
After the preset is reached or the desired amount of fuel is dispensed the operator presses the FINISH button to
end the delivery. If the preset is reached and the user wishes to "top off " the tank then the preset may be disabled
or reset to accomplish the dispensing of additional product.
DISPENSING VOLUME WITHOUT PRESET
The following steps the operator may take to dispense product without price.
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must then select a product first and press ENTER).
2. Deliver Product to desired amount.
3. Press FINISH button to print Volume Ticket.
DISPENSING VOLUME WITHOUT PRICE BUT WITH PRESET BEFORE DISPENSING
The following steps the operator may take to dispense product without price but with a preset before the delivery.
1. In Volume Mode, press START button.
2. Press PRESET to go to the Preset screen. Press NEXT button to go to Change Preset screen, increment up or
down to desired default preset, then press Enter to accept. (If the user wishes to change the default preset to a
different number; from the Change Preset screen they press NEXT and increment up or down for each digit,
pressing NEXT to move from digit to digit. They press Enter to accept the new number. If the user wishes to
disable the preset then press the PRESET button, scroll to Disable and press Enter. The Icon to the left of the
preset field is solid when the preset is enabled and flashes when disabled.)
3. Press START to begin delivery - (if Display Head is configured for more than one product, you must then select
a product first and press ENTER).
4. Deliver Product until Preset level is reached and flow is shut down.
5. Press FINISH button to print Volume Ticket.
DISPENSING VOLUME WITHOUT PRICE BUT WITH PRESET AFTER DISPENSING
The following steps the operator may take to dispense product without price but with a preset after dispensing
begins.
1. In Volume Mode, press START button to initiate delivery (if Display Head is configured for more than one
product, you must select a product first).
2. Press PRESET button.
3. Press PRESET to go to the Preset screen. Press NEXT button to go to Change Preset screen, increment up or
down to desired default preset, then press ENTER to accept. (If the user wishes to change the default preset
to a different number; from the Change Preset screen they press NEXT and increment up or down for each
digit, pressing NEXT to move from digit to digit. They press ENTER to accept the new number. If the user
wishes to disable the preset then press the PRESET button, scroll to Disable and press ENTER. The Icon to
the left of the preset field is solid when the preset is enabled and flashes when disabled.)
4. Deliver Product until Preset level is reached and flow is shut down.
5. After dispensing the preset may be disabled to "top off" tanks by pressing the PRESET button, scrolling to
Disable and pressing ENTER.
6. Press FINISH button to print Volume Ticket.
