Vectron Touch 15, User Manual

Page: 36 / 83

36
POS TOUCH 15
POS TOUCH 15 PC T
POS TOUCH 15 II
6 .1. 2 . Connecting the POS Touch 15 to the power
supply
A
CAUTION
a
Danger of tripping and damaging device
caused by device cables lying unpro-
tected in the room.
X
Route the device cables so that they
do not pose a potential hazard!
X
Route the cables so that they are not
subject to tensile loading.
NOTICE
a
Damage caused by excessively high
voltages or currents.
X
Use an earthed socket to which
alternating current between 110 and
240 volts is connected.
X
Use power sources which are pro-
tected with a residual-current circuit
breaker.
• Insert the earthing-pin plug of the mains cable in a socket.
6 .1. 3. Connecting devices to the POS Touch 15
i
Your Vectron specialist retailer will be
glad to inform you on available peripher-
al devices.