Vectron POS Vario, User Manual

Page: 126 / 368

126
V eC T rOn POS Va rIO
Inser ting the 7.4 . keyboard template
The Vectron POS Vario without touch screen is exclusively
operated via the keyboard. The individual keyboard ele-
ments can be assigned individual functions. This facilitates
data input since you can book a PLU by simply pressing a
button. For a better overview on the assigned functions,
you can use a keyboard template.
For models with a flat keyboard, lift the cover foil at the
front of the POS system and put the template under the
foil.
For models with a raised keyboard, the function tags for
each key have to be cut out. Put the function tag onto
the key, then put on the plastic cover. Make sure that the
cover is correctly adjusted. The tapered edge points at the
operator.
Using the touch screen 7. 5.
If your POS system is equipped with a so-called touch
screen you can operate the touch-sensitive display by
using your finger. The monitor layout can be designed
according to your demands. For the respective functions,
elements can be created in this layout that considerably
ease the input of data, as it sometimes suffices to actuate
a touch button, e.g. to book to a PLU.
Attention!
The touch screen may only be touched with fingers.
The use of pens, pencils or other sharp objects may dama-
ge the device.
No liability is accepted for such damages!