Vectron POS MobilePro III, Notes On Installation And Operation

Page: 28 / 68

28
V EC T RON POS MObIl EPRO III
3.1. 2. Connecting the Charging station to the
power supply
NOTICE
a
Damage caused by excessively high
voltages or currents.
X
Use the provided power supply Vectron
PS20 or any other Vectron-approved
power supply.
X
Use an earthed socket to which
alternating current between 110 and
240 volts is connected.
X
Use power sources which are protected
with a residual-current circuit breaker.
• Put the power supply plug into the power connector of the
charging station.
1
Fig. 1: Power connector of charging station
Pos. Designation Description
1 Power connec-
tion Connector for power supply plug.
• Insert the Euro plug of the power supply to a socket.