19
GETTING TO KNOW YOUR SPC-3000/3500
2.2.1.8 10/ 100/ 1000 Mbps Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel i219 Ethernet Phy; LAN
2 is powered by Intel I210 Ethernet engine. When both LAN 1 and LAN 2 work
in normal status, iAMT 11.0 function is enabled. Using suitable RJ-45 cable, you
can connect the system to a computer, or to any other devices with Ethernet
connection, for example, a hub or a switch. Moreover, both of LAN 1 and LAN 2
supports Wake on LAN and Pre-boot functions. The pin-outs of LAN 1 and LAN
2 are listed as follows:
DVI-D
DP
LAN 1
LAN 2
Switch
On | Off
Pin No.
10/ 100Mbps
1000Mbps
1
E_TX+
MDI0_P
2
E_TX-
MDI0_N
3
E_RX+
MDI1_P
4
----
MDI2_P
5
-----
MDI2_N
6
E_RX-
MDI1_N
7
-----
MDI3_P
8
------
MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection. The LED indicator on the
right bottom corner lightens in solid green when the cable is properly connected
to a 100 Mbps Ethernet network; The LED indicator on the right bottom corner
lightens in solid orange when the cable is properly connected to a 1000Mbps
Ethernet network; The left LED will keep twinkling/ off when Ethernet data
packets are being transmitted/ received.
1
8
10Mbps
100Mbps
1000Mbps
Right
Bottom Led
Off
Solid
Green
Solid
Orange
Left
Bottom Led
Flash
Yellow
Flash
Yellow
Flash
Yellow