44
GETTING TO KNOW YOUR ECS-9000
©Vecow ECS-9000 User Manual
2.4.5 SATA Power Connector
The ECS-9000 also equip with a SATA power connector. The one port supports
5V (Up to 2A) and 12V (Up to 2A) current to the hard drive or SSD.
The pin assignments of J3 , J4 are listed in the following table:
J3
J4
Pin No.
Definition
Pin No.
Definition
1
+12V
3
GND
2
GND
4
+5V
2.4.6 M2DOM
Innodisk M2DOM S20/S30 3ME3 is a M.2 based disk module with vertical
type form factor. By its mechanical design can help board maker to release up
to 90% space of motherboard as we as improve system reliability by its fixed
mechanism. M2DOM series product will offer with multiple interfaces, including
SATA III, PCIe. The SSD support hot plug function and can be removed or
plugged-in during operation. User has to avoid hot plugging the SSD which is
configured as boot device and installed operation system.
Surprise hot plug: The insertion of a SATA device into a backplane (combine
signal andpower) that has power present. The device powers up and initiates an
OOB sequence.
Surprise hot removal: The removal of a SATA device from a powered backplane,
without first being placed in a quiescent state.
M2 CN1
