19
Copy Failure History:
As USB stick is connected to the device, all error history in the internal
memory is transferred to USB stick when “Copy Failure History” is selected. When loading is
finished completely, push the enter key (F4) to exit from this page.
6.1.4.
SMS
In order to use SMS, optional GSM module is mandatory to have. Refer to Section
10.1 for information regarding GSM module connection.
“SMS” submenu is selected on the menu page
by the value increase (F1) and decrease (F2)
keys. The page on the left appears when enter
key (F4) is pushed. Submenus on SMS page is
selected by using increase (F1) and decrease
(F2) keys. Selected submenu can be adjusted by
using enter key (F4). If you want to exit the
page, push the backspace key (F3).
Activation or deactivation of SMS function can be adjusted on “SMS” submenu. If you want
to activate this function, choose “on” by pushing the enter key (F4). If you want to
deactivate SMS function, choose “Off” by pushing the enter key (F4).
“Repeat time” is the frequency of sending SMS. The user is notified again by sending SMS if
the failure still continues. Repeat time can be adjusted to 8 hours, 16 hours and 24 hours by
pushing enter key (F4).
“SMS Numbers” is selected on the SMS page by
using the value increase (F1) and decrease (F2)
keys. The page on the left appears when enter
key (F4) is pushed. The phone numbers can be
entered in this page and SMS notifications are
delivered to these phone numbers in case of
any failure.
SMS can be sent to 5 different mobile phones. According to demand, 1
st
, 2
nd
and 3
rd
numbers can be users’ numbers and 4
th
and 5
th
numbers can be technical service staffs’
numbers.
Enter country code before the phone numbers.
A cursor flashes under a digit which means you can set this digit of the number. Each digit of
phone numbers is entered one by one. The first digit of the phone number is entered by
pushing value increase (F1) and decrease keys (F2) and tab key (F3) is pushed to enter the
second digit. The second number is entered pushing value increase (F1) and decrease keys
(F2) and tab key (F3) is pushed to enter the next digit. After all digits of the phone number
are entered completely by this way, push the enter key (F4) to enter the next phone
number.
