Fig. 4
Fig. 5
Fig. 6
Fig. 8
Fig. 7
3.3. SPECIAL INSTALLING FOR HYDRAULIC OPERATOR
WITH OPENING GATE OUT (Fig. 8)
In the case of gate leaf length up to m. 2.3, it is recommend the
use of hydraulic operator PH 27
5
BAC (lock open / close).
In the case of gate leaf length more than m. 2.3, it is
recommend the use of hydraulic operator PH 27
5
R or PH 390
R (reversible).
The mounting dimensions of the hydraulic operator is
detected by the following Table C.
In case of opening gate to the outside, adjust the anti-trap, as
follows:
- Screw A = valve regulation closing force,
- Screw B = valve regulation opening force.
To reduce the torque, you need to turn the screw
counterclockwise;
To increase the torque, you need to turn the screws clockwise.
TABLE «C»:PH 27
5
- Fixing brackets
OPENING
ANGLE
(*) rod stroke required without the hydraulic slowdown
(**) max dimensions
Length dimension A=50 mm
Length dimension B=+ 100 mm
PH
275
