Page
1
Revised diagram FA 24/02/2003
VDO SPEED ALERT
Installation Instructions
TO MOUNT THE SPEED ALERT UNIT
a.
Make sure the Speed Alert is mounted in a location away from direct sunlight.
b.
Install the unit to provide good access from driver’s seat. It should be mounted within easy
reach, eg. The centre console or either side of the dashboard where visible, is an ideal
mounting position.
c.
The unit can be mounted on any smooth surface by means of double-sided tape (provided
in the Kit). Remove any wax or polish from the dash or centre console with a recognised
cleaning fluid. Fix the adhesive tab to the smooth panel of the Speed Alert that will make
contact with the mounting surface of the vehicle. Hold the Speed Alert at the casing edge
and solidly apply to the desired position.
Do not press on the display or the front buttons.
LOOM ROUTING
