manualshive.com logo in svg

VDO SmartTerminal, Operating Instructions Manual, Page: 19 / 76

Share
Download
VDO SmartTerminal Operating Instructions Manual Download Page 19

User Manual VDO SmartTerminal

Installing software

Installation of the software

© Continental Automotive GmbH

19

Installation of the software

IMPORTANT

You must have administrator rights or be authorised to install programs in or-
der to install the software for the VDO SmartTerminal.

The installation includes both the VDO TerminalTools, the
VDO TerminalService and the USB driver. Depending on the scenario, you can
choose the appropriate package for installation.

Our recommendation for the various connection options:

Connection op-
tion

VDO Termin-
alTools

VDO Termin-
alService

USB driver

Standalone

Workstation

Workstation

-

USB connection

Workstation

Workstation

Workstation

Network mode

Workstation

Server

-

The VDO TerminalTools should be installed on all workstations on which an
employee is to have access to the system. If you do not have your own server,
you can install the VDO TerminalService on a workstation. However, in this
case, this workstation must be switched on if other workstations are to commu-
nicate with the terminals.

Installing software

Install the software for the VDO SmartTerminal as follows:

1. Log into the operating system using a user account which has administrative

rights.

2. Close any running applications, particularly a running virus scanner, as it might

cause problems during installation.

3. Download the current installation file 

setup.zip

 from the internet

(

www.smartterminal.vdo.com

).

4. Unzip the file.

5. Start the installation by double clicking onto 

setup.exe

The installation assistant starts automatically with the language selection for
the installation process.

IMPORTANT

The language selection only applies to the installation process. The VDO Ter-
minalTools are started according to the language settings in the operating
system.

Summary of Contents for SmartTerminal













































































Reviews:

No comments