VDO OCEANLINK -, Operating Instruction

Page: 55 / 204

1. Press the MENU button and select SCREEN CONFIG .
2. Scroll until you see an empty page (" NO SCREEN ") and select it.
3. Scroll and select the page layout TRIPLE : the layout opens with the first box green.
4. Press the ENTER button and select the engine whose parameters are to be displayed: the box
layouts appear.
5. Select the layout SINGLE : the page layout reappears with the box red.
6. Scroll and select the required data: the box turns green.
7. Place the cursor on another box and select the engine whose parameters are to be displayed and
then the box layout TRIPLE : the page layout reappears with the box divided in three sectors.
8. Select the sector to be set: the sector border turns red.
9. Scroll and select the required data: the sector border turns green.
10. Press MENU to select the box: the box border turns green.
11. Scroll and select the last box and repeat steps 4-5-6.
12. Hold down the
MENU button to save settings and return to the data page.
Add a page with a bar graph layout
1. Press the MENU button and select SCREEN CONFIG .
2. Scroll until you see an empty page (" NO SCREEN ") and select it.
3. Scroll and select the page layout GRAPH .
4. Select the engine whose parameters are to be displayed: the layout opens with the first bar graph
green.
5. Press the ENTER button: the bar graph turns red.
6. Scroll and select the selected data: the bar graph turns green.
7. Scroll and place the cursor on the next bar graph and repeat points 5 and 6.
8. Scroll and place the cursor on the last bar graph and repeat points 5 and 6.
9. Hold down the
MENU button to save settings and return to the data page.
Add a page with an analog gauge layout
An example of how to add a page with a NAV DASH three gauge layout is provided below.
1. Press the MENU button and select SCREEN CONFIG .
2. Scroll until you see an empty page (" NO SCREEN ") and select it.
3. Scroll and select the page layout Nav Dash 2 : the layout opens and the center of the first gauge is
green.
4. Press ENTER : the gauge center turns red.
5. Scroll and select the selected data: the gauge center turns green.
6. Scroll and place the cursor on the next gauge and repeat points 4 and 5.
7. Scroll and place the cursor on the last gauge and repeat points 4 and 5.
8. Hold down the
MENU button to save settings and return to the data page.
Delete a page
1. Press the MENU button and select SCREEN CONFIG .
2. Scroll until you see the page to be deleted and select it.
55
Data page configuration
7” TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG