VDO DTCO 4.1, Instruction Manual

Page: 99 / 172

7
Second menu level – menu functions Menus
© Continental Automotive Technologies GmbH
99
► Menu point display vehicle
You can use this menu point to display
the data from the mass memory.
IMPORTANT
Comparable to a printout, the data is
shown on the display, whereby one row
of the printout (24 characters) is shown
split in two rows.
 23.03.2023 14:
55 (UTC)
---------------
--------
Fig. 115: Example for the data display
If, during scrolling through the informa-
tion, you scroll back using buttons /
you can only call up approx. 20 previous
rows of the printout.
Use the button to leave the display.
Note:
• Calling up the functions to display the
data is identical with the ones for
printing the data. Therefore, they are
not described any further below.
• It is possible to call up every display in
local time.
printout in
UTC time yes
printout in
UTC time no
Fig. 116: No – display in local time
Select the listed functions step by step:
• displaying all driver activities in chro-
nological order.
• displaying all saved or still active
events and faults.
• displaying the instances when the set
speed was exceeded.
• displaying data about vehicle identific-
ation, sensor identification, and calib-
ration.
• Display data of the previously inserted
tachograph card.
• display the number of the company
card of the registered company. If no
company is registered,
___
is dis-
played.
• Display current vehicle weight.
(On-board weight system required)
• Display DTCO version and software
version.