VDO DTCO 4.1, Instruction Manual

Page: 45 / 172

4
Handling of the cards Operation (general)
© Continental Automotive Technologies GmbH
45
• Company card:
–
Yes
if you wish to log off the com-
pany on the DTCO 4.1.
–
No
if the company lock should stay
activated.
IMPORTANT
If the company lock is deactivated, the
saved data of your company will still be
locked for an external company.
3. Please confirm your selection using
the button .
IMPORTANT
A note is displayed for the following
cases:
• Periodic verification of the DTCO 4.1
• Validity of the company or driver
card expires
• Download of data on the driver card
is due
IMPORTANT
If an inserted card is currently being
processed (for reading or ejection) and
the ejection of a card in the other card
drawer is requested then the DTCO 4.1
first completes the current process of
the first card before the ejection pro-
cess for the second card is started.
The card feed of the corresponding
drawer comes out
4. Remove the card.
5. Carefully fold up the card drawer
cover.
6. Push the card drawer into the card
drawer until it engages.
■ Handling of the cards
• Do not bend or fold the tachograph
card and do not use them for anything
other than their intended purpose.
• Do not use damaged tachograph
cards.
• Keep all contact surfaces clean, dry,
and free of grease and oil (always use
a protective cover).
• Protect the card from direct sunlight
(do not leave it lying on the instrument
panel).
• Do not place it in direct proximity to
strong electromagnetic fields.
• Do not use the card beyond its period
of validity. Apply for a new tachograph
card in a timely manner before expiry.