7
Menus
Second menu level – menu functions
82
Operating instructions DTCO 4.0 - Edition 11.2018 - A2C19916900
• If no driver cards are inserted, only
printout vehicle
is displayed.
This does not apply for the input menus.
3. Use the buttons / to select the re-
quired menu point, e.g. the printout of
the daily value
(4)
and confirm your
selection with the button .
24h day
25.10.2018
24.10.2018
23.10.2018
Fig. 80:
Selection required day
4. Use the buttons / to select the re-
quired day and confirm that selection
with button .
printout in
UTC time yes
printout in
UTC time no
Fig. 81:
No = printout in local time
5. Use the buttons / to select the re-
quired printout type and confirm the
selection with the button .
For3 seconds, the DTCO 4.0 indicates
that a printout has started. You can
cancel the printout.
Next, the last selected menu point is dis-
played.
6. Further procedure:
• Select another printout with the
keys / .
• Using the button you return to
the next higher menu level.
► Menu access lock
According to the regulations, access to
stored data is regulated via access rights
and implemented by corresponding
tachograph cards.
Display example of a missing authorisa-
tion:
DK /4 6 0 2 4
7 8
----------------
Fig. 82:
Missing authorisation
The expected data display is incomplete.
Personal data is partially or completely
masked.
► Leaving menu functions
Automatically
The menu is exited automatically in the
following situations:
Service Only!