5
Setting activities
Operation by the driver
© Continental Automotive GmbH
53
■ Setting activities
► Possible activities
The following activities can be set:
Driving time (automatic when
driving)
All other working times
Standby times (waiting times,
co-driver time, sleep cabin
time during the journey for
driver 2)
Breaks and rest times
► Changing activities
IMPORTANT
Setting the activities is only possible
when the vehicle is stationary.
a. Press the combination button
for
driver 1.
The standard display is shown.
12:40 0km/h
100436.8km
Fig. 28:
Standard display with activity
(1)
b. Press the combination button
, until
the required activity appears in the
display
(1)
.
c. In crew operation: As co-driver (driver
2), press button
.
► Automatic setting
The DTCO 4.0 automatically sets the fol-
lowing activities:
for ...
Driver 1
Driver 2
Journey
Vehicle stop
IMPORTANT
Ensure the correct calculation of the
VDO Counter (option):
• It is essential that you set activity
at the end of a shift or break.
Automatic setting after ignition on/
off (default))
After
Ignition on/off
, the DTCO 4.0
can switch to a defined activity, for ex-
ample
.
This activity can only be programmed
with a company card or by an authorised
specialist workshop.
The activity
(1)
and/or
(2)
, which auto-
matically changes due to
Ignition on
or
Ignition off
, is shown in the
standard display. It will flash for approx.
5 seconds.
18:01 0km/h
123456.7km
Fig. 29:
Flashing of the activity in standard dis-
play
After
Ignition on
, the previous dis-
play is shown.
Service Only!