3
Key settings (overview)
Device description
© Continental Automotive GmbH
23
The front interface is located under a
cover.
The access rights to the functions of this
interface depend on the inserted tacho-
graph card.
Access rights of the tachograph cards
■ Key settings (overview)
The key settings of the DTCO 4.0 in-
clude:
• Entering the vehicle registration num-
ber and the country of registration (if
not already carried out by the work-
shop)
Inserting member state and vehicle
• Activity changes when the ignition is
off
Automatic activities after ignition
• Recording of speed and engine speed
profiles
Printing speed profiles (option)
• D1/D2 Status detection
Shift start – Inserting driver card
• VDO Counter display (option)
■ Remote control
The DTCO 4.0 can be remotely con-
trolled. To do this, you will need:
• DTCO
®
SmartLink (pluggable
Bluetooth interface)
• Device with Bluetooth interface, e.g.
smartphone or test device
• Application software (app) on the
device
You can activate the remote control on
the DTCO 4.0 yourself and then use a li-
cence code to link the tachograph with
your mobile device.
Entering the vehicle registration
number
The entry of the vehicle registration num-
ber and the authorising member state
can also be carried out via an app in
connection with the DTCO
®
SmartLink.
Service Only!