Configuring the CTC II
22
• Edition 01/2
009
Configuring the CTC II
This Chapter gives you an overview of
•
possible CTC II settings for tachograph inspection and
•
the CTC II settings for communication with the Roller Interface Module.
CTC II configuration is carried out in the
Service
menu.
The
Service
menu is password-protected. You receive the password directly
from the Continental Trading GmbH by e-mail.
Please remember to handle your Roller Interface Module password as
carefully as you would handle a cover seal. Make sure that only authorised
persons know the password.
Giving the password to unauthorised third parties is expressly
forbidden.
◄
Important
When configuring the CTC II, always adhere to your country's valid legal
regulations!
◄
Important